Key Benefits

• Deep-Cleans Automotive Glass: Removes contamination that conventional glass cleaners cannot shift.
• Removes Hard Water Marks: Effectively tackles mineral staining and stubborn water spotting.
• Strips Failed Glass Coatings: Removes degraded water repellents and old glass protection before reapplication.
• Eliminates Oily Films: Breaks down traffic film, grease, and stubborn exterior glass contamination.
• Chemical & Abrasive Action: Combines active cleaning chemistry with fine polishing abrasives for enhanced performance.
• Contains Cerium Oxide: Uses a proven glass-polishing abrasive to restore clarity.
• Effective by Hand: Delivers strong cleaning performance without requiring a machine polisher.
• Machine Compatible: Can also be applied by machine for faster treatment of larger glass areas.
• Flexible Residue Removal: Residue can be rinsed away while wet or buffed off after it has fully dried.

Perfect For

• Windscreens with stubborn water marks
• Removing mineral deposits from automotive glass
• Stripping failed rain repellents and glass coatings
• Removing oily road film
• Preparing glass before applying a new sealant or coating
• Restoring clarity to neglected exterior glass
• Professional detailing and paint-correction preparation

How to Use

1. Prepare the Glass: Work only on cool glass away from direct sunlight. Clean away loose dirt and particulate contamination first.
2. Apply Sparingly: Use approximately one pea-sized amount for each 30cm square section of glass.
3. Polish the Surface: Apply using a damp, soft cotton cloth or suede microfibre applicator and work the product thoroughly using small circular motions.
4. Maintain Moisture: Lightly mist the glass with water if machine polishing or working across a larger area.
5. Remove the Residue: Rinse the residue away while still wet, or allow it to dry fully before buffing with a clean, dry microfibre cloth.
6. Check the Result: Lightly mist the cleaned glass with water. Properly decontaminated glass should form a flat, uniform film rather than repelling water.
7. Dry Thoroughly: Wipe the glass dry after completing the water test.

Important Information

• Use only on genuine glass surfaces.
• Do not use on plastic windows or aftermarket tinted glass.
• Do not use on textured glass.
• Test first on unusual or specialised glass finishes.
• Store in cool conditions.

PRO TIP: Use Re-View before applying a new glass coating or rain repellent. When the glass no longer beads water and instead holds a flat, uniform water film, the old protection and contamination have been properly removed, leaving a clean surface ready for bonding.