Bilt Hamber Touchless
Bilt Hamber Touch-Less is a powerful, biodegradable pre-wash designed to remove heavy road grime and traffic film before your wash mitt ever touches the paint.
Key Benefits
- Powerful Pre-Wash Cleaner: Removes road film, traffic grime, bug residue, and general contamination before contact washing.
- Reduces Swirl Marks: Lifts and loosens dirt, reducing the amount of contamination your wash media needs to remove.
- Highly Concentrated Formula: Excellent dilution ratios make Touch-Less extremely economical to use.
- Biodegradable: Environmentally responsible formulation with outstanding cleaning performance.
- Safe on Protected Vehicles: Suitable for ceramic coatings, sealants, waxes, and paint protection film when used as directed.
- Foam Cannon Compatible: Designed for use through foam cannons and pressure washers for maximum coverage.
- Professional-Level Results: Trusted by enthusiasts and professional detailers worldwide.
Perfect For
- Pre-washing heavily soiled vehicles
- Traffic film removal
- Winter maintenance washes
- Ceramic coated vehicles
- Paint protection film (PPF)
- Maintenance detailing
- Weekly vehicle washing
How to Use
- Dilute Accordingly: Mix Touch-Less according to the level of contamination and your foam cannon manufacturer's recommendations.
- Apply to a Cool Vehicle: Spray an even layer over the entire vehicle, working from the bottom upwards for maximum coverage.
- Allow to Dwell: Let the product work for several minutes without allowing it to dry on the surface.
- Rinse Thoroughly: Pressure rinse from the bottom up, then finish from the top down to remove loosened contamination.
- Continue with Contact Wash: Follow with your preferred bucket wash or rinseless wash if required.
PRO TIP: The safest wash starts before you touch the paint. A quality pre-wash like Touch-Less can remove a significant amount of contamination before contact washing, dramatically reducing the risk of introducing swirl marks and wash marring.
Dilution calculator
Pick your container and your ratio, and read off how much concentrate to pour.
A foam cannon does not spray its bottle. It draws from the bottle into the pressure washer's flow, so a 1 L bottle can put 11 L on the car and the ratio in the bottle tells you nothing about what reaches the paint. Measure your setup once and the number holds for every product that quotes a PIR.
Common questions
-
Parts water to one part product. A 10:1 mix is ten parts water and one part product, so a 1 L bottle takes 91 ml of product and 909 ml of water. A few brands print theirs the other way round, so check the label if a number looks unusually strong.
-
Water first, then the concentrate. Pouring concentrate into an empty bottle and topping it up makes it foam over the top, and you lose some of what you just measured.
-
Most diluted products keep for a few weeks in a sealed, labelled bottle out of sunlight. Write the product and the ratio on the bottle. An unlabelled trigger bottle is how the wrong chemical ends up on someone's interior.
-
Panel Impact Ratio is the concentrate as a percentage of everything leaving a foam cannon, the bottle water and the pressure washer water together. It matters for snow foam and pre-wash only, because a cannon draws from its bottle into the washer's flow rather than spraying the bottle.
-
A syringe or a measuring jug with millilitre graduations. Capfuls vary by bottle and by how full you fill them, and at 256:1 a few millilitres out is a noticeable change in strength.