P&S Brake Buster
P&S Brake Buster Total Wheel Cleaner is a professional-grade, acid-free solution engineered to safely and effectively remove brake dust, grime, oils, and light corrosion from wheels and tyres.
Key Benefits
- Foaming Gel Action: Clings to wheel faces and barrels for improved dwell time and cleaning power.
- Acid-Free Safety: Safe for all wheel finishes, including painted, clear-coated, and alloy wheels.
- Effective Contaminant Removal: Cuts through brake dust, oil, road grime, and light corrosion.
- Corrosion Inhibitors: Leaves a light protective layer to help guard against future corrosion.
- Tyre-Cleaning Versatility: Doubles as a powerful tyre cleaner for a complete wheel service.
- Economical Performance: High-performing formula ideal for both professionals and enthusiasts.
How to Use
- Rinse: Rinse wheels and tyres to remove loose debris.
- Apply: Spray Brake Buster generously onto the wheel and tyre surfaces.
- Dwell: Allow the product to dwell so the foaming gel can penetrate contamination.
- Agitate: Agitate with a wheel brush or tyre brush as required.
- Rinse: Rinse thoroughly with water to reveal a clean finish.
PRO TIP: For heavily soiled wheels, allow Brake Buster a longer dwell time and use dedicated wheel barrel and face brushes to maximise cleaning results without harsh chemicals.
Dilution calculator
Pick your container and your ratio, and read off how much concentrate to pour.
A foam cannon does not spray its bottle. It draws from the bottle into the pressure washer's flow, so a 1 L bottle can put 11 L on the car and the ratio in the bottle tells you nothing about what reaches the paint. Measure your setup once and the number holds for every product that quotes a PIR.
Nothing matches that. Check the product's own page for its ratio.
Common questions
-
Parts water to one part product. A 10:1 mix is ten parts water and one part product, so a 1 L bottle takes 91 ml of product and 909 ml of water. A few brands print theirs the other way round, so check the label if a number looks unusually strong.
-
Water first, then the concentrate. Pouring concentrate into an empty bottle and topping it up makes it foam over the top, and you lose some of what you just measured.
-
Most diluted products keep for a few weeks in a sealed, labelled bottle out of sunlight. Write the product and the ratio on the bottle. An unlabelled trigger bottle is how the wrong chemical ends up on someone's interior.
-
Panel Impact Ratio is the concentrate as a percentage of everything leaving a foam cannon, the bottle water and the pressure washer water together. It matters for snow foam and pre-wash only, because a cannon draws from its bottle into the washer's flow rather than spraying the bottle.
-
A syringe or a measuring jug with millilitre graduations. Capfuls vary by bottle and by how full you fill them, and at 256:1 a few millilitres out is a noticeable change in strength.
I’ve been using p&s Brake Buster Wheel & Tyre Cleaner, and it does a great job removing brake dust, road grime, and dirt,It makes cleaning my wheels much easier and leaves them looking fresh with minimal scrubbing
A little goes a long way, and I’d definitely recommend it. Great product for the price 👌🔥
