Bilt Hamber Re-View is a powerful deep-cleaning glass polish designed to remove stubborn contamination that ordinary glass cleaners leave behind. Its advanced chemical and abrasive formula strips oily films, mineral deposits, hard water marks, and failed water-repellent coatings, restoring genuinely clean glass and improving visibility. Containing cerium oxide, Re-View delivers excellent results by hand while also being suitable for machine application.

Key Benefits

• Deep-Cleans Automotive Glass: Removes contamination that conventional glass cleaners cannot shift.
• Removes Hard Water Marks: Effectively tackles mineral staining and stubborn water spotting.
• Strips Failed Glass Coatings: Removes degraded water repellents and old glass protection before reapplication.
• Eliminates Oily Films: Breaks down traffic film, grease, and stubborn exterior glass contamination.
• Chemical & Abrasive Action: Combines active cleaning chemistry with fine polishing abrasives for enhanced performance.
• Contains Cerium Oxide: Uses a proven glass-polishing abrasive to restore clarity.
• Effective by Hand: Delivers strong cleaning performance without requiring a machine polisher.
• Machine Compatible: Can also be applied by machine for faster treatment of larger glass areas.
• Flexible Residue Removal: Residue can be rinsed away while wet or buffed off after it has fully dried.

Perfect For

• Windscreens with stubborn water marks
• Removing mineral deposits from automotive glass
• Stripping failed rain repellents and glass coatings
• Removing oily road film
• Preparing glass before applying a new sealant or coating
• Restoring clarity to neglected exterior glass
• Professional detailing and paint-correction preparation

How to Use

1. Prepare the Glass: Work only on cool glass away from direct sunlight. Clean away loose dirt and particulate contamination first.
2. Apply Sparingly: Use approximately one pea-sized amount for each 30cm square section of glass.
3. Polish the Surface: Apply using a damp, soft cotton cloth or suede microfibre applicator and work the product thoroughly using small circular motions.
4. Maintain Moisture: Lightly mist the glass with water if machine polishing or working across a larger area.
5. Remove the Residue: Rinse the residue away while still wet, or allow it to dry fully before buffing with a clean, dry microfibre cloth.
6. Check the Result: Lightly mist the cleaned glass with water. Properly decontaminated glass should form a flat, uniform film rather than repelling water.
7. Dry Thoroughly: Wipe the glass dry after completing the water test.

Important Information

• Use only on genuine glass surfaces.
• Do not use on plastic windows or aftermarket tinted glass.
• Do not use on textured glass.
• Test first on unusual or specialised glass finishes.
• Store in cool conditions.

PRO TIP: Use Re-View before applying a new glass coating or rain repellent. When the glass no longer beads water and instead holds a flat, uniform water film, the old protection and contamination have been properly removed, leaving a clean surface ready for bonding.