DIY Detail Incredible Suds Car Wash
DIY Detail Incredible Suds is a high-foam, pH-neutral car wash soap engineered to deliver thick, slick foam for a safe and satisfying wash.
Key Benefits
- Thick, Slick Foam: Produces dense, lubricating suds to help minimise wash-induced marring.
- Multi-Method Use: Performs equally well in foam cannons, foam guns, or traditional bucket washes.
- pH-Neutral Formula: Safe for coated vehicles and existing wax or sealant layers.
- Effective Cleaning Power: Advanced surfactants lift road film and grime without harshness.
- Residue-Free Finish: Rinses clean with no streaks, leaving paint glossy and fresh.
- Pleasant Fragrance: Makes every wash more enjoyable without overpowering scents.
How to Use
- Pre-Rinse: Rinse the vehicle thoroughly to remove loose dirt and debris.
- Bucket Mix: Add 15–30 mL to a 12–16 L wash bucket and fill with water to generate foam.
- Wash: Using a microfiber wash mitt, wash from top to bottom with light pressure.
- Foam Option: For foam cannons, add 30 mL to the bottle, fill with water, and adjust for desired foam.
- Rinse & Dry: Rinse thoroughly and dry with a premium microfiber drying towel.
PRO TIP: Use Incredible Suds as a pre-wash foam to soften and encapsulate grime before contact washing, especially helpful on darker paint or heavily driven vehicles.
Dilution calculator
Pick your container and your ratio, and read off how much concentrate to pour.
A foam cannon does not spray its bottle. It draws from the bottle into the pressure washer's flow, so a 1 L bottle can put 11 L on the car and the ratio in the bottle tells you nothing about what reaches the paint. Measure your setup once and the number holds for every product that quotes a PIR.
Nothing matches that. Check the product's own page for its ratio.
Common questions
-
Parts water to one part product. A 10:1 mix is ten parts water and one part product, so a 1 L bottle takes 91 ml of product and 909 ml of water. A few brands print theirs the other way round, so check the label if a number looks unusually strong.
-
Water first, then the concentrate. Pouring concentrate into an empty bottle and topping it up makes it foam over the top, and you lose some of what you just measured.
-
Most diluted products keep for a few weeks in a sealed, labelled bottle out of sunlight. Write the product and the ratio on the bottle. An unlabelled trigger bottle is how the wrong chemical ends up on someone's interior.
-
Panel Impact Ratio is the concentrate as a percentage of everything leaving a foam cannon, the bottle water and the pressure washer water together. It matters for snow foam and pre-wash only, because a cannon draws from its bottle into the washer's flow rather than spraying the bottle.
-
A syringe or a measuring jug with millilitre graduations. Capfuls vary by bottle and by how full you fill them, and at 256:1 a few millilitres out is a noticeable change in strength.
I’ve recently been using DIY Detail Incredible Suds Car Wash and I’m seriously impressed with it. It produces heaps of thick, rich suds and gives the car a really good clean without feeling harsh on the paint.
The lubrication is excellent, which makes washing the car feel much safer and helps reduce the chance of dragging dirt and grime across the paint. It also rinses off nicely and leaves the car looking clean and fresh.
Definitely a product I’d recommend to anyone who enjoys detailing their car. Great suds, great cleaning ability and a little product goes a long way. 👌🧼🚗
Much easier to work with than V1. A tiny bit goes a long way with this